Details for W4HPT Digital Mobile Radio (DMR) configuration.<\/p>\n\n\n\n
The repeater is presently operating only in DMR Digital Voice or Analog FM modes. DMR operations can be local through the repeater or via the DMR network to any Talk Group available on the BrandMeister Network.<\/p>\n\n\n\n
Frequency Details<\/strong><\/p>\n\n\n\n Repeater RX: 448.5000 MHz (This is a Radio\u2019s TX frequency)<\/p>\n\n\n\n Repeater TX: 443.5000 MHz (This is a Radio\u2019s RX frequency)<\/p>\n\n\n\n Radios should be programmed with a RX frequency of 443.5000 and a Positive Offset of 5 Mhz.<\/p>\n\n\n\n Color Code: 1<\/strong><\/p>\n\n\n\n Analog FM Operation<\/strong><\/p>\n\n\n\n Tone: 100 (Analog FM only)<\/strong><\/p>\n\n\n\n Slot details<\/strong><\/p>\n\n\n\n Timeslot 1: 31515 STATIC VA – Tidewater<\/p>\n\n\n\n Timeslot 1: 3224947 WX4AKQ \u2013 SKYWARN Severe Weather NETs<\/p>\n\n\n\n Timeslot 1: 311470 LOCAL <\/p>\n\n\n\n RF Only and any radio monitoring 311470<\/p>\n\n\n\n Timeslot 2: 3151 STATIC VA – Statewide<\/p>\n\n\n\n Scheduled Static: Timeslot 1: 31513, Friday, 2130 \u2013 Saturday, 0100 in support of the Nightowl DMR Net. 31515 will T RF over the air during this time period to encourage participation in this net and advance DMR proficiencies and skills.<\/p>\n\n\n\n Program your radio codeplugs to utilize the slots listed for these Talkgroups to avoid the repeater TXing on both TS 1 and TS 2, one Static and one Dynamic for the same TG. This maximizes availability and exploits the advantages of 2 timeslots and DMR\u2019s Time Division Multiplexing (TDMA) capabilities!<\/p>\n\n\n\n Please use Timeslot 2 for Dynamic calls (any IDs not listed as Static)<\/p>\n\n\n\n This maintains Slot 1 available for its Static TGs and avoids interrupting QSOs.<\/p>\n\n\n\n Any other BrandMeister Talk Groups accessed on either Time Slot 1 or 2 are DYNAMIC with an inactivity timeout of 15 minutes after which the slot will revert back to its Static programming. Time Slots are only applicable to local RF access and must be considered when designing your Code Plug for W4HPT Repeater operations.<\/p>\n\n\n\n If you program your radio for analog FM operations on the W4HPT Repeater, you will need a 100.0 tone included. CTCSS tones do not apply to DMR operations. Generally, the repeater is not used in analog FM mode but maintains this capability in the event DMR capabilities are lost.<\/p>\n\n\n\n If you have questions, please feel free to contact us:<\/p>\n\n\n\n Chris-KC4F<\/p>\n\n\n\n Howard-WZ4K<\/p>\n\n\n\n Don-KJ4MZ<\/p>\n\n\n\n for more information or details.<\/p>\n\n\n